Pulasr RNN14 Brake Pieces

[Kariba]

I recently bought a Pulsar RNN14 shell to use the suspension on my B13. I am currently faced with a problem though; the front rotors and calipers on the Pulsar are not too cracking (AD22VF). I may even venture to say the rear ones may need changing too. Can anyone assist me?

[Jason@JGY]

Originally Posted by Kariba

I recently bought a Pulsar RNN14 shell to use the suspension on my B13. I am currently faced with a problem though; the front rotors and calipers on the Pulsar are not too cracking (AD22VF). I may even venture to say the rear ones may need changing too. Can anyone assist me?

huh?
the front's are AD? or they are not?
if they are, the NX2k uses those so you can cross reference that way

I think, think, the rears are the same as yours.......but not sure

[Kariba]

Originally Posted by Jason@JGY

huh?
the front's are AD? or they are not?
if they are, the NX2k uses those so you can cross reference that way

I think, think, the rears are the same as yours.......but not sure

You are correct, the NX2000 uses the same type brake setup as the Pulsar; AD22VF. Can you help me out?

[Kariba]

Swapped the front suspension from the Pulsar (RNN14) to the Sentra (B13) today and I may not need the calipers two front calipers; only the front right hub and rotor. Have these two pieces?

[Jason@JGY]

Kariba, I have the most difficult time following your posts...........sorry

Are you asking if we have factory gti-r right front hub and rotor? or B13?

[Kariba]

Originally Posted by Jason@JGY

Kariba, I have the most difficult time following your posts...........sorry

Are you asking if we have factory gti-r right front hub and rotor? or B13?

Factory GTi-R front hub and rotor.

[Kariba]

As the title says, I'm in desperate need of a pair of NX2000/B13 SE-R knuckles/hubs & radius rods/torque arms. This is to facilitate in my rear disc conversion. Unfortunately the RNN14 (Pulsar) and B13 radius rods/torque arms won't work on the B13. The only things I would be able to use from the RNN14 rear knuckle/hub assembly are the rotors and calipers.