View Single Post
Old 08-26-2009, 09:40 AM
Justin@SnailPower's Avatar
Justin@SnailPower Justin@SnailPower is offline
Join Date: May 2009
Location: Central VA
Posts: 32
Justin@SnailPower is on a distinguished road
Default FS: BUILT SR20DET Redtop |BRIAN CROWER|HKS|OS Giken|GReddy|JWT|NISMO|CP|0 Miles!

Price: $6550.00 OBO
Location: Central Va
Condition: BRAND NEW unless stated otherwise
Contact: 434.989.8980 -or-

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Other Items For Sale:

FS: BUILT S13 Redtop SR20DET |0 Miles|Brian Crower|CP|GReddy|OS GIKEN|HKS|JWT|etc etc
FS: SR20DET parts |Topmount|Fidanza flywheel|CircuitSports RAS|TQ damp|SYNAPSE 40mm
FS: H4 High/Low Beam HID kit !! |8000k|Brand New| !! MOTIVATED SELLER !!
FS: BLITZ Type01's |5x114|16x8|+38|2pc Wheels| !! MOTIVATED SELLER !!
FS: S14 Interior and Misc parts |MILD Part Out|Seats|Carpet|Panels|Trunk Liner|& More

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

This swap is being built for my S14 drift car. I've decided to stop production, and focus the money in a more responsible manner. I was considering selling the S14 - but I just can't let her go.

This engine is still WRAPPED From My Machine Shop and has Not Been Assembled. The positive side to this is that you will know that it was assembled to Your Specification, and Broken In Properly.

If you prefer to buy a swap that has been assembled and broken in by some unknown person, who very well might not be qualified to do so - Thats Your Choice! But this swap is completely UNTAINTED! I'm NOT selling it due to complications, or damage - I AM selling it because I've dropped too much money into it, and I need to STOP!

The swap will include the following parts and was built on a Redtop SR20DET platform:

Built Head-
Brian Crower Valves (1mm over)
Brian Crower Valvesprings
Brian Crower Ti Retainers
Circuit Sports Rocker Arm Stoppers
Jim Wolfe Technologies Valve guides/seals
Complete Port-n-Polish along with valvejob
GReddy Intake Plenum with 90mm Throttle body (used)
Top feed Fuel Rail from JGYcustoms
RC750cc Injectors (lightly used)
Synapse Fuel Pressure Regulator

Built Bottomend-
Brian Crower Connecting Rods
CP Pistons | 87mm | 9.0:1 CR
Machined Crankshaft (micro-polished, knife-edged, balanced)
Machined Bearing Seats to accommodate the GTI-R 5 hole bearings (more lube)
ARP Main Studs
ARP Head Studs
New Oil pump
New Water pump

OS Giken Twin Clutch kit
Short Shifter
(also have extra new fidanza flywheel)

NISMO engine mounts
BRAND NEW SR20DET Wiring Harness
FMIC kit (complete)
Stainless Tubular Topmount Manifold (T3, v-band wastegate)
Matched downpipe (to manifold)
Turbonetics 60trim T3 Turbo w/ stage3 wheel (lightly used)
HKS SSQV BOV (lightly used)
Currently have Synapse 40mm Wastegate (2 bolt - TIAL style)
GReddy Oil Filter Relocation kit
Magnetic Oil Drain Plug
Cometic Head Gasket

etc etc etc

All of the above listed parts are still Brand New - Never Used (unless stated otherwise). Once again, you have options as to what you'd want included with the swap.

You will NEED:
-50mm V-Band Wastegate to match the manifold
-Aftermarket Cams (recommended)

I'm really NOT wanting to part this swap out, but if we can line up a few people that would be interested in separate parts, we can work something out.

((( I need to get my wife's camera and take some pictures of the above listed parts, but everything other than the Topmount manifold is pretty straight forward and self-explanitory, in my opinion)))
Reply With Quote