Pulasr RNN14 Brake Pieces

[Kariba]

I recently bought a Pulsar RNN14 shell to use the suspension on my B13. I am currently faced with a problem though; the front rotors and calipers on the Pulsar are not too cracking (AD22VF). I may even venture to say the rear ones may need changing too. Can anyone assist me?

[Jason@JGY]

I recently bought a Pulsar RNN14 shell to use the suspension on my B13. I am currently faced with a problem though; the front rotors and calipers on the Pulsar are not too cracking (AD22VF). I may even venture to say the rear ones may need changing too. Can anyone assist me?

huh?
the front's are AD? or they are not?
if they are, the NX2k uses those so you can cross reference that way

I think, think, the rears are the same as yours.......but not sure

[Kariba]

huh?
the front's are AD? or they are not?
if they are, the NX2k uses those so you can cross reference that way

I think, think, the rears are the same as yours.......but not sure

You are correct, the NX2000 uses the same type brake setup as the Pulsar; AD22VF. Can you help me out?

[Kariba]

Swapped the front suspension from the Pulsar (RNN14) to the Sentra (B13) today and I may not need the calipers two front calipers; only the front right hub and rotor. Have these two pieces?

[Jason@JGY]

Kariba, I have the most difficult time following your posts...........sorry

Are you asking if we have factory gti-r right front hub and rotor? or B13?

[Kariba]

Kariba, I have the most difficult time following your posts...........sorry

Are you asking if we have factory gti-r right front hub and rotor? or B13?

Factory GTi-R front hub and rotor.

[Kariba]

As the title says, I'm in desperate need of a pair of NX2000/B13 SE-R knuckles/hubs & radius rods/torque arms. This is to facilitate in my rear disc conversion. Unfortunately the RNN14 (Pulsar) and B13 radius rods/torque arms won't work on the B13. The only things I would be able to use from the RNN14 rear knuckle/hub assembly are the rotors and calipers.

[Kariba]

I'm trying to get my hands on a pair of decent front and rear calipers from a RNN14 or NX2000. If anyone can help me out or point me in the right direction, I would be most grateful.

[Kariba]

I am still looking for the titled calipers. Can anyone help? I was told the J30 rear calipers are the same as those of the RNN14; can anyone confirm this? If so can anyone point me in the direction where I can find a decent pair? Below are pics of my RNN14 calipers.

http://i55.tinypic.com/wtzrqs.jpg

http://i52.tinypic.com/59vgj4.jpg

I'm trying to get my hands on a pair of decent front and rear calipers from a RNN14 or NX2000. If anyone can help me out or point me in the right direction, I would be most grateful.

[Andrew@jgy]

We have rotors and calipers for an nx2000 for sale on our used site.

[Kariba]

That's the whole thing, it needs to be an NX2000 rear caliper w/ ABS. The NX2000 rear calipers w/out ABS would be equivalent to the regular SE-R rear calipers. I have RNN14 calipers so I need to be careful else the caliper won't fit.

[jholman]

That's not a real easy caliper to come by

[Kariba]

any AD22VF calipers available?

[Kariba]

Anyone :confused:

any AD22VF calipers available?

[Andrew@jgy]

http://sentrastuff.com/brakes-suspension-wheels.htm


Go to this link and look there is a front set on there.

[Kariba]

http://sentrastuff.com/brakes-suspension-wheels.htm


Go to this link and look there is a front set on there.

Shows me calipers and rotors, i only need calipers.

[Andrew@jgy]

So youll have anextra set of rotors. Its so cheap why not have an extra set?

[Kariba]

Well I can only afford the calipers and are only interested in the calipers but its seems I'm not worthy of the sale.:mad:

[jholman]

Kariba, you are so worthy of the sale....but we can't really break up the used stuff on our sites

Do a Wilwood setup it'll make you super baller