Injectors

[WILLSGTIR]

hey any body want to trouble shoot injectors? :eek:

[Jason@JGY]

huh?

1. you poopoo standing
2. you have injectors?
3. you like speed for pleasure?

who are you? Paris Hilton?

[WILLSGTIR]

.

[MuscleMike]

Jason said to tell you that your injector sound like you have the power and the signal going to them.

Uninstall your injectors and borrow your mom's hair dryer, heat up the injectors and see if they start to work.

This has worked from us.

I would have said your girlfriend's dryer, but since your SR doesn't run, I know you don't have one.

:eek:

[WILLSGTIR]

.

[WILLSGTIR]

.

[MuscleMike]

I would realy like the standing and crapping thing to go away. still need help with that one.
i tryed the dryer thingy and what do ya know it worked..
as allways though other problems are arizing. the lifters and valve train sound as if they are marbles in can. im using the brian crower III. does anybody know if i should have reshimmed? i *** umed they were like jwt and you just bolt them in and your done. i did go ahead and burn them in though for thirty mins thinking it was just part of the start up proceedure and when i disasymbled the valve cover all looked well exept the excess play. im no expert at valve lash and really hate that sorrta thing. im also wondering if the 5w30 oil i am using and the pre lube on all the cams and bearings is just too thin to quiet the solid lifters down. the intake measured in the middle of the spectrum @.010 between the cam and rocker arm but that seems loose. you can move the rocker arm a fair bit up and down. i realy should have posted this the tech section or at least renamed the thread.

ill do some more research and see what pops up.
i also forgot to mention the extremly rich problem im having as well. i think i burned the last two good brain cells i had and am certain that all plant life in the imediate area will never grow again. between the fuel and **** oil comming through the turbo into the intake bird were falling as they flew passed.:o

cool....................glad the hair dryer thing worked for you! I'll fix the sig thing for you too...........you know, you can change if you want........I'll change it to "BigMike wanna be" for now p.s. did you get a girl yet?

[WILLSGTIR]

.

[WILLSGTIR]

n

[WILLSGTIR]

n...

[Jason@JGY]

1. don't give Mike a hard time, he's sensitive because Itstrickland doesn't like him.
2. You do NOT need to reshim with the BC cams.
3. Your motor may be worn out. Most gti-r motors are in poor shape now a days
4. Get it running with the stock cams first, then we can go to the bigger ones later

[WILLSGTIR]

n

[Jason@JGY]

he's in the bathroom right now

I actually think he is talking to you just to get you to buy a set of wheels, though.

He's having a bad week. He found out his car is slow.

[ltstrickland]

1. don't give Mike a hard time, he's sensitive because Itstrickland doesn't like him.
2. You do NOT need to reshim with the BC cams.
3. Your motor may be worn out. Most gti-r motors are in poor shape now a days
4. Get it running with the stock cams first, then we can go to the bigger ones later ........................................BITE ME TONY HAWK!

[NathanM]

He found out his car is slow.
Took him long enough

[MuscleMike]

you want a piece of me?

[WILLSGTIR]

n

[Jason@JGY]

We can only do jobs if they are left here.

Venting to the atmosphere is fine.

What type of hell raising is the pcv valve doing?

Don't ever call me Tony.