PDA

View Full Version : RB stroker bug

Jason@JGY
01-30-2008, 03:59 PM
The stroker bug has bit another customer. We are building a 2.85 RB26DETT for DJ. We are starting this week.

Our buddies at Brian Crower are sending us a crank that changes the stroke from a 73.7 to a 79mm stroke.

We are using the Pro BC rods and CP pistons.

All the Greddy goodies are already here for the build such as bumpsticks and oil goodies.

The customer wants us to use a HalTech to tune the car after the install.
Jason@JGY
11-23-2009, 05:39 PM
Motor is together, just awaiting shims for the head.......then it's going in the car!

take a look at some of the new photos
http://www.jgy.cc/Project%20Cars/DJ_Wojnar/DJ_Wojnar.htm (http://www.jgy.cc/Project%20Cars/DJ_Wojnar/DJ_Wojnar.htm)
NathanM
11-25-2009, 01:14 AM
What octane is the car going to be set up for?
Jason@JGY
11-25-2009, 10:41 AM
93 octane and 114 octane.........with the Haltech E11, you can do dual maps
Jason@JGY
12-01-2009, 11:07 AM
Exhaust cam is installed, bucket shims are sized and ready
Jason@JGY
12-03-2009, 08:47 PM
Kaboooom!!!


Also Notice The Cover, Clear Greddy Cover



If That Doesn't Make You Do The River Dance In Your Jammies, Then You Need To Leave This Forum........nathan, You Dancing?
NathanM
12-06-2009, 01:05 PM
Oh I'm dancing.... and I don't wear any jammies :eek:
Jason@JGY
12-30-2009, 12:40 PM
update, motor is in
MuscleMike
02-11-2010, 06:55 PM
update, motor is in

Jason, I love you man.
Jason@JGY
02-12-2010, 04:37 PM
you need to really back off............way back