Oil feed line...

[GTiRSE-R]

So driving the car around and noticed that there was a puddle of oil under the car. looked, thought that the banjo bolt was just loose so I tightened it up a little and didn't change anything, looked closer and found it to be the seam between the fitting and the tube. So I know you guys sell a SS replacement line, but I find myself very much so broke. Please don't shoot me I know its wrong but I am JB welding the seam just so I can get around town. But is there a cheaper way to fix it untill I can spring for the 80$ line?

[Dustin]

Try the JB weld, if it works great if not i dont know where else to point you untill you can buy the SS line from us.

[gtirse-r]

ok so tryed the JB weld a couple time infact and it kept failing, but then I took some silver solder and plumming flux and cleaned it up really well then soldered it and it seems to be working perfect. Not even a drop of oil out of it.