I have a trouble Code!!!

[timg20t]

Hey guys,

Im showning a trouble code when I scanned my car with a OBDII scanner. Its P0325 ( Knock Sensor 1 Circuit malfunction bank 1 or 1 sensor) it scared me. Is this code a problem with the knock sensor or is my sensor sencing knock then throwing the code. What should i do?

Tim

[turbomario98]

what grade of gas are you using? plugs???? i use the bkr7e's. make sure that the cat is flowing correctly, the fuel is high test, fuel filter is new, and its getting enough fuel. you should have a fuel pressure gauge inside the car(jason says this is a must have). try everything before replacing it because its the hardest thing next to the oil filter without the relocation kit.

[timg20t]

I also have the bkr7e's, i have a fuel gauge and everything seems fine. And I dont use anything but 93octane. Im going to change my fuel filter its been a little while. I cleared the codes last nite and now the only thing showing is the P1400 egr code. Oh yea. I want to know what the other plug goes to on the EGR i have the temp one hooked up. But i went to a high port motor from a low port so I dont have a EGR now. The thing is i have to pass emissions and i want to buy the part the other plug goes to. I have a restrictor on the temp plug so that code dose not show but now I need the other code gone. Any help?

Tim